Skip to main content

Dynamik DAC series · Belt-drive piston compressors

Piston air compressors for every application

Dynamik DAC piston compressors are belt-driven machines from 2 to 20 HP — single-stage 8 bar models for light tasks and two-stage 10 bar configurations for professional and industrial demand. Every unit runs a genuine FIAC, FINI or NEWCO pump block, on receivers from 50 to 1,000 litres, and is backed by Dynamik's KSA-wide service network.

Contact Sales
  • 2–20 HP
  • 8–10 bar
  • 50–1000 L
  • FIAC · FINI · NEWCO pumps
DAC 1000-NV10-20HP (2×10HP) — Dynamik DAC piston air compressor

DAC 1000-NV10-20HP (2×10HP) · Two-Stage · 10 Bar · 2492 L/min

Premium QualityBelt Drive · Cast-Iron Pumps · 50–1000 L
Full range

Dynamik piston compressor range

DAC series · full range — 27 models
ModelTankHPPumpStageMax pressureAir displacementView model
Light & Everyday — 8 models
DAC 50-AB360-2HP50 L2 HPAB360 by FIACSingle Stage8 Bar350 L/minView model
DAC 50-MK103-2HP50 L2 HPMK103 by FINISingle Stage8 Bar365 L/minView model
DAC 100-AB360-2HP100 L2 HPAB360 by FIACSingle Stage8 Bar350 L/minView model
DAC 100-MK103-2HP100 L2 HPMK103 by FINISingle Stage8 Bar365 L/minView model
DAC 100-NG2.8-2HP100 L2 HPNG2.8 by NEWCOSingle Stage8 Bar253 L/minView model
DAC 150-AB360-3HP150 L3 HPAB360 by FIACSingle Stage8 Bar350 L/minView model
DAC 150-MK103-3HP150 L3 HPMK103 by FINISingle Stage8 Bar365 L/minView model
DAC 150-NG2.8-3HP150 L3 HPNG2.8 by NEWCOSingle Stage8 Bar253 L/minView model
Workshop & Automotive — 6 models
DAC 200-AB360-3HP200 L3 HPAB360 by FIACSingle Stage8 Bar350 L/minView model
DAC 200-MK103-3HP200 L3 HPMK103 by FINISingle Stage8 Bar365 L/minView model
DAC 200-NG3-3HP200 L3 HPNG3 by NEWCOSingle Stage8 Bar315 L/minView model
DAC 300-AB360-3HP300 L3 HPAB360 by FIACSingle Stage8 Bar350 L/minView model
DAC 300-MK103-3HP300 L3 HPMK103 by FINISingle Stage8 Bar365 L/minView model
DAC 300-NG3-3HP300 L3 HPNG3 by NEWCOSingle Stage8 Bar315 L/minView model
Professional — 5 models
DAC 300-N4-4HP300 L4 HPN4 by NEWCOSingle Stage8 Bar541 L/minView model
DAC 500-BK114-5.5HP500 L5.5 HPBK114 by FINITwo-Stage10 Bar582 L/minView model
DAC 500-N5-5.5HP500 L5.5 HPN5 by NEWCOTwo-Stage8 Bar606 L/minView model
DAC 500-BK119-7.5HP500 L7.5 HPBK119 by FINITwo-Stage10 Bar860 L/minView model
DAC 500-N5-7.5HP500 L7.5 HPN5 by NEWCOTwo-Stage10 Bar606 L/minView model
Industrial — 8 models
DAC 500-NG6-7.5HP500 L7.5 HPNG6 by NEWCOTwo-Stage10 Bar798 L/minView model
DAC 500-BK120-10HP500 L10 HPBK120 by FINITwo-Stage10 Bar1080 L/minView model
DAC 500-NV10-10HP500 L10 HPNV10 by NEWCOTwo-Stage10 Bar1246 L/minView model
DAC 500-N5-15HP (2×7.5HP)500 L15 HPN5 by NEWCOTwo-Stage10 Bar1212 L/minView model
DAC 1000-NV10-10HP1000 L10 HPNV10 by NEWCOTwo-Stage10 Bar1246 L/minView model
DAC 1000-N5-15HP (2×7.5HP)1000 L15 HPN5 by NEWCOTwo-Stage10 Bar1212 L/minView model
DAC 1000-NG6 – 15HP (7.5×2)1000 L15 HPNG6 by NEWCOTwo-Stage10 Bar1596 L/minView model
DAC 1000-NV10-20HP (2×10HP)1000 L20 HPNV10 by NEWCOTwo-Stage10 Bar2492 L/minView model
Key features

Built on proven pump technology

Italian Pump Blocks

Genuine FIAC, FINI and NEWCO pump blocks — proven European compressor technology — fitted as standard across the DAC range.

Slow-Running Belt Drive

Belt-driven pumps turn at low RPM for cooler compression, lower noise and longer service life compared with direct-drive units.

Cast-Iron Cylinders & Heads

Rugged cast-iron cylinder blocks with finned heads for effective heat dissipation, built for dusty, high-temperature Gulf job-site conditions.

Thermal Overload Protection

Motors are protected against overheating and overload, with automatic pressure switch control and certified safety valves on every receiver.

Large Receivers, Easy Drainage

50–1,000 L receivers store generous air reserves; accessible drain valves and clear gauges make daily operation and maintenance simple.

KSA-Wide Support

Genuine spare parts, certified service engineers and 24/7 technical support across Saudi Arabia — backed by the IKK Group network.

Segments

Four segments. One dependable air supply.

Segment 01

Light & Everyday piston compressors

Practical air supply and easy selection.8 models

Dynamik Light & Everyday piston compressors provide a practical source of compressed air for routine maintenance, inflation, cleaning and light pneumatic tasks.

  • Tire inflation
  • Cleaning
  • Blow-off
  • Light pneumatic tools
  • Small workshops
  • Service areas
View models
Segment 02

Workshop & Automotive piston compressors

Workshop productivity, receiver capacity and belt-driven operation.6 models

Dynamik Workshop & Automotive piston compressors are designed for workshops and service environments where dependable compressed air is needed for pneumatic tools and maintenance tasks.

  • Automotive workshops
  • Tire service
  • Pneumatic tools
  • Spray applications
  • Cleaning
  • Maintenance
View models
Segment 03

Professional piston compressors

Higher capacity and 10 bar configurations.5 models

Dynamik Professional piston compressors combine larger receivers and higher-output configurations for professional workshops and applications with greater compressed-air demand.

  • Professional workshops
  • Automotive service
  • Spray painting
  • Pneumatic tools
  • Fabrication
  • Maintenance
View models
Segment 04

Industrial piston compressors

Air demand, receiver capacity, motor power and two-stage compression where applicable.8 models

Dynamik Industrial piston compressors are designed for higher-demand compressed-air applications, with large receivers and higher motor-power configurations.

  • Industrial workshops
  • Production support
  • Maintenance lines
  • Fabrication
  • Pneumatic equipment
View models
How to choose

How to choose the right piston compressor

Four checks that match a DAC model to your tools, your supply and your duty cycle.

  1. Step 01

    Match the motor to your tools

    Add up the air demand (L/min) of every tool that will run at the same time, then add a 25% margin. Light tools (inflation, cleaning, nailers) need 200–400 L/min → 2–3 HP. Workshop tools (grinders, sanders, spray guns) need 500–900 L/min → 4–7.5 HP. Continuous industrial demand needs 1,000+ L/min → 10–20 HP.

  2. Step 02

    Pick your working pressure

    Single-stage 8 bar models cover most workshop tools. Choose a two-stage 10 bar machine for continuous duty and long air lines.

  3. Step 03

    Size the receiver

    The tank stores air and lets the motor rest between cycles. Intermittent use: 50–150 L. Regular workshop duty: 200–300 L. Continuous professional and industrial duty: 500–1,000 L.

  4. Step 04

    Check your power supply

    1-phase 220–240 V covers up to 3 HP; 5.5 HP and above runs on 3-phase 380–400 V — confirm your installation before ordering.

Applications

Where DAC piston compressors work

Light & Everyday

  • Tire inflation
  • Cleaning
  • Blow-off
  • Light pneumatic tools
  • Small workshops
  • Service areas

Workshop & Automotive

  • Automotive workshops
  • Tire service
  • Pneumatic tools
  • Spray applications
  • Cleaning
  • Maintenance

Professional

  • Professional workshops
  • Automotive service
  • Spray painting
  • Pneumatic tools
  • Fabrication
  • Maintenance

Industrial

  • Industrial workshops
  • Production support
  • Maintenance lines
  • Fabrication
  • Pneumatic equipment
Downloads

DAC series documentation

Product Datasheet

Full technical data sheet for this model

Technical Manual

Detailed technical documentation

Spare Parts List

Genuine spare parts and kits

Installation & Operation Manual

Setup, operation and maintenance guide

FAQ

Piston compressor questions, answered

Single-stage models (8 bar) compress air once and suit light to medium workshop tools. Two-stage models (10 bar) compress in two steps, running cooler and delivering more air — the right choice for continuous professional and industrial duty.

Dynamik fits genuine Italian pump blocks from FIAC, FINI and NEWCO — each model's exact pump is listed in its specification table — so you get European build quality with full local support.

Light & Everyday and Workshop models run on 220 V single-phase (1 PH, 60 Hz). Professional and Industrial two-stage models need a 220–380 V three-phase supply (3 PH, 50–60 Hz).

Yes. Genuine filters, valves, belts and pump kits are stocked locally, and our certified technicians provide preventive and corrective maintenance anywhere in the Kingdom, with 24/7 hotline support.

Match the receiver to your air consumption: short, intermittent tasks need 50–100 L; continuous tool use needs 200–300 L; and multi-tool or industrial lines need 500–1,000 L with two-stage pumps. Our team will size the right unit for free.

Not sure which model fits your application?

Send us your air-demand list — our engineers will match a DAC configuration to your tools and power supply, with a same-day response.

Contact Sales